Skill Level 3/5
Previous experience recommended.
This model builds into a 1:1200 scale waterline replica of Titanic and is approximately 9 inches (23cm) long when complete.
You will need a colour printer capable of handling card or cover stock to print the parts sheets. 67 lb cover stock (approx 8.5 thousandths of an inch or 0.2 mm thick) is recommended.
Card modeler Jerry Vondeling has modified the Titanic model to depict the ship as portrayed in the 1980 movie Raise the Titanic. He has also created models of the sister-ships Olympic and Britannic.
The model files
- 363 KiB - This document contains the instructions only (6 pages).
Optional display base for letter or A4 size paper.
- 202 KiB - This document contains the optional display base (1 page).
Raise the Titanic model
Model design by Jerry Vondeling
- 363 KiB - This document contains the original Titanic
instructions (6 pages) and is required for this model.
The parts and instructions are in Adobe PDF format. Your web browser may allow you to read and print these files, otherwise you'll need a PDF reader such as Adobe's Acrobat Reader or Foxit Reader.
Last updated on 5 February 2021
Copyright 2007-2021 by Ralph Currell.